简介
This is a 26 point star. The tips clip together without glue. As the star is completely hollow it can be easily illuminated. For a complete star you need to print 18 of the long tips and 8 of the short ones. The STLs in the download are sized to produce a ca. 20cm diameter star. Assembly is nothing for the impatient as you close up the star it gets harder to clip together the pieces. What helps is a pair of angled tweezers/pliers. Also, if you clip/unclip each interface once before, it goes together more easily the second time. The assembly starts with a ring of four of the long tips. Then add a half sphere to one side by alternating between short and long tips. This pattern the gets mirrored to the opposite side. Check the pictures for some hints. Happy Making.
About this model
Multipoint 3D Star is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
