MN D90 Body on WPL RC Chassis Conversion Kit
- 16 次浏览
该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。
在 Cults3D 查看 ↗简介
So you just got the very beautiful MN D90 body, but you are lazy to build the chassis or spend the money to upgrade yet another chassis. Why not just mount the body on your existing modded WPL C Series chassis? You can print the rear mount at 25% infill, but the axle truss at least 50%. Also, trim the surface where the link rod mount so they are able to rotate smoothly, or you risk breaking the axle truss. make sure you have good bed adhision while printing the rear mount first layer at least 50% speed or lower axle truss orientation, follow as pic attached Additional parts needed is 2x 10mm M3 screw and 2x M3 lock nut. Cheers *版权所有，侵权必究！如要售卖此设计请先得批准！我是有上淘宝的玩家！ Get WPL C14 here https://www.banggood.com/WPL-C14-2_4G-Four-Drive-Climber-RC-Car-KIT-With-Servo-Motor-p-1254503.html?p=DG23031123036201501P Get MN D90 here https://www.banggood.com/1-Set-MN-90-Kit-112-2_4G-4WD-Rc-Car-Crawler-Monster-Truck-Without-ESC-Transmitter-Receiver-Battery-p-1370557.html?p=DG23031123036201501P Printer i used to print this https://www.banggood.com/DIY-Creality-CR-10-3D-Printer-300300400mm-Printing-Size-175mm-04mm-Nozzle-p-1085645.html?p=DG23031123036201501P
About this model
MN D90 Body on WPL RC Chassis Conversion Kit is a 免费 3D model in the 交通工具 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
