FRM01 Delay Timer Relay Protective Case Box

简介

I recently got this delay timer however the LED location and 12V in is different so I made one myself. Took 6hrs to draw. Ahhh The exact timer I got from BG, however even their picture isn't updated. https://www.banggood.com/DC-12V-PLC-Self-lock-Delay-Relay-Multifunction-Cycle-Timer-Module-Switch-Control-p-1091554.html?p=DG23031123036201501P Normally, you just need to print the below 3 items, a. Cover.stl b. Bottom.stl - drill through the holes with 2.5mm drill bit, then tap using M3 screw c. Nipple.stl - need to trim after print However, if you like to mount it straight onto surface/top of something, just print the spacer.stl instead of the bottom.stl Other parts you need is M3 screw of at least 12mm long thread. If you would like to print this for commercial sale, please contact me in comment. Printer that i used https://www.banggood.com/DIY-Creality-CR-10-3D-Printer-300300400mm-Printing-Size-175mm-04mm-Nozzle-p-1085645.html?p=DG23031123036201501P&cur_warehouse=CN