Max Flowrate Test (Extrusion System Benchmark) - 3D-Printing Geek
- 13 次浏览
该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。
在 Creality Cloud 查看 ↗简介
Test the max flow rate of your K1 / K1 Max using the pre-sliced GCode. DO NOT USE THE STL!!! It's just a dummy required for uploading the GCode.INSTEAD DOWNLOAD it from here: https://github.com/3DPrintingGeek/STL_Files/blob/main/Calibration/Creality_K1_and_Max/Max-flowrate-test-20-34-230-220-K1.gcodeThe test based on the work of Stefan Hermann (@CNCKitchen). The originally generated GCode did not work on the K1 / K1 Max, so I specially modified it, to be printable on the K1 / K1 Max.Download the GCode and print it. Then follow the great instructions on Stefan's website to evaluate it (https://www.cnckitchen.com/blog/extrusion-system-benchmark-tool-for-fast-prints.
About this model
Max Flowrate Test (Extrusion System Benchmark) - 3D-Printing Geek is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
