简介
QIDI MAX 4 VENTED RISER BY SAC3D For Non Vented Version Please See, https://cults3d.com/en/3d-model/tool/qidi-max-4-non-vented-riser-by-sac3d Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows the glass to slide as intended. Test printed in both PLA and PETG. Printed 0.2mm layers, 15% infill, no supports. i did print with a brim on the sides to help prevent warping, this may not be needed. 2 versions, one clean with no extra cut out for the USB and one other that has a cutout for a USB stick to clear. please let me know if the tab fitment between parts it too tight of too loose. Fitment tested in both PLA and PETG so should be good to go.
About this model
QIDI MAX 4 VENTED RISER BY SAC3D is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
