Forklift Gpu Stand by TTenebrisX

Forklift Gpu Stand by TTenebrisX

USD 1.50 STL 数码配件
  • 16 次浏览

该模型托管于 MyMiniFactory。文件、图片及许可信息归原创作者所有。

在 MyMiniFactory 查看 ↗

简介

DesignThe Forklift GPU Stand is designed to mimic a miniature forklift, providing a fun and artistic way to display or support a GPU or similar component. PurposeThis stand serves both as a functional tool to support a GPU and as an artistic display piece, adding a unique touch to any tech enthusiast's setup. Printing SuggestionsMaterial: PLA or ABS recommended for better durability.Layer Height: High-resolution settings for smooth finish, around 0.1-0.2 mm.Infill: 15%Supports: Minimal or no supports required depending on your printer’s bridging capabilities.Assembly Instructions1.75 mm filament used for axles, (wheels are functional but will not move the model for gpu support) lift arm sticks to the base all other parts are press fit plus some glue. the adjustable forks have a screw to tighten the lift at the correct height for your gpu. Scaling may be necessary for smaller gaming towers | Download free and paid 3D printable STL files

About this model

Forklift Gpu Stand by TTenebrisX is a 付费 3D model in the 数码配件 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

相似模型