Button test rig - confusedCoyote
- 15 次浏览
该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。
在 Creality Cloud 查看 ↗简介
A simple test stand to hold 4 12mm buttons with a base large enough to hold an Arduino Nano & small breadboard. There are two options, one that holds the button & the other allows you to slip a pre-wired button in so they can be tested in situ They are designed to hold this button - https://www.amazon.co.uk/gp/product/B08JCG82KT/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=underthesmall-21&linkId=35b2c26248e80f3dbed96a090f39aa31&language=en_GB but any 12mm button will fit I've included the sketchup file so you can modify it for your own sized buttons Added a breadboard that can be used in association with the buttons that then can be connected to an Arduino or a shift register (and then onto the Arduino). You can replace the 74HC165 with a 74HC595 to work in reverse & have a nice light show. **UPDATE**: The slot (1mm instead of 3mm) in older versions was too small for the wires to pass through so please download this one
About this model
Button test rig - confusedCoyote is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
