Paramotor TTO meter holder - SMT M 🦊

简介

This is a dual TTO meter holder for paramotor harness. It has been tested for many hours and works excelent. -Use a 3-3.5mm drill for redrilling the four holes and removing the self contained support layer. -Press four M3 lock nuts (optional see below***). -Use four M3x16mm bolts for fixing. ***You can use the hole covers that comes with the meter as nuts by inserting the bolt from back to front instead. By this way the installation is more clean. See pictures for both methods. Printed using ABS or PLA at 80% infill. Contribute by donating: - This designs has a lot of effort and testings, so please if you like it and found usefull consider to make a donation, any amount will be really apreciate and you will contributing with improved and future designs. You can donate here: http://villamanydonate.blogspot.com Thank you!