Jewelry Case

简介

This is designed for vendors who sell smaller items such as jewelry or keychains. This case was designed with several criteria in mind: 1 - Snap close and go. The case is held shut with high strength magnets - 3 in each corner. No hooks/latches - simple & clean. 2 - Hold all inventory in place. No taking items on/off every show. The case is 2" deep and the hooks just almost touch when closed. 3 - Clean & non-distraction to items within case. Often when you look at other cases, the more jumbled or rough looking the case is, you are distracted from the products. I designed this so to be minimalistic, to make the items within the case standout. 4 - Simple to build - rather - ZERO assemble/disassemble for shows. You build this one time and done! 5 - Wind Resistance!! How many of our displays get knocked over because of the wind! I added a lip on the back of each corner - no matter of position to allow clamps to keep the wind from blowing over. 6- Easy Creation. I wanted to make this so ANYONE with a 3D printer can make it. The hardest part is gluing stuff together ;-) That's right! NO drilling, screwing, ordering 15 different parts, many trips to hardware store... 7. LIGHT WEIGHT!!!!! – Not wood or metal