简介
Please slice the base, as it will not print optimally without slicing. Also print the segments several times so that you end up with about 5 individual segments. The small clips on the side of each segment can be ignored as I have miscalculated their function --> They are useless, you can cut them off This thing is contracted via a 9g micro servo and I suggest you use EMG sensors or flex sensors to control it. Plug everything into an Arduino, attach it to your arm (with a power bank) and away you go! I used M5 screws, fishing line and some rubber rope to complete this. The construction is pretty simple: Screw everything together, glue the servo on, run the fishing line through the holes in the segments, plug everything into an Arduino or anything that controls the servo as you like. As I said before, I suggest you use an EMG sensor as it feels the most natural to control, or a flex sensor (it's cheaper and requires less prep work) and put it on your middle finger, it may not feel as natural. You can stick rubber or something else on the segments to improve the grip If you have a problem with this, feel free to contact me or ask me in the comments! THERE ARE 2 NEW ADDONS WITH WHICH YOU CAN GIVE THE FINGER AN IMPROVED LOOK! I would be very happy about a donation!
About this model
Extra fingers is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
