Creality CFS Stacker

简介

I've designed this model as a neat way to store your CFS units. It's modular and can be added to if you purchase additional units in the future. I added m6 studding to the sliders for extra strength against flexing under the weight of the cfs units. It works brilliantly! The runners are available on amazon, I used these: https://www.amazon.co.uk/dp/B08S3MTR7W?ref=ppxyo2ovdtbfedasintitle&th=1 You will need various additional hardware and tools to assemble the system, listed below: m4x8mm heat inserts - 16 per cfs unit plus an additional 6 for the wall bracket m4x10mm bolts - 16 per cfs unit m4x25mm bolts - 6 for the wall brackets m6 studding - 4 pieces at 388mm long per cfs unit Superglue (optional) Screws and wall plugs to secure the bracket to the wall I've used pla+ for mine When you import the files into your slicer, remember to load each section with it's relative chamfer inlay as one file, you can then change the colours to suit your preference and the slicer will know the correct position for the parts. Mine is set up for 3 units, for when the K1 max becomes CFS compatible! I've tried to make it as simple as possible to assemble, but if you have any problems, please let me know.