Mini Tiny-Touch NMPG

Mini Tiny-Touch NMPG

免费 STL 微缩模型
  • 25 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

Mini version of the Tiny-Touch NMPG. The dimensions are close to 3DTouch / BLTouch. Optical Endstop: (10 psc) https://www.aliexpress.com/item/4000301976485.html (1 psc) https://www.aliexpress.com/item/1005001572356137.html Ultra Micro Linear Servo: https://www.aliexpress.com/item/1005001804526164.html Default for "R", if need for "L" - just mirror flag before print. Klipper: [servo MiniTinyTouch] pin: X maximum_servo_angle: 150 initial_angle: 0 [probe] pin: !X deactivate_on_each_sample: False x_offset: 0.0 y_offset: 32.0 z_offset: 0.400 speed: 2.0 samples: 3 sample_retract_dist: 2.0 lift_speed: 1.0 activate_gcode: SET_SERVO SERVO=MiniTinyTouch ANGLE=150 ENABLE=1 G4 P99 deactivate_gcode: SET_SERVO SERVO=MiniTinyTouch ANGLE=0 ENABLE=0 Update 13.04.2023: reduced dimensions in thickness and height for shaft use 15mm hex-shaft 1.5mm diameter If need for M3-nut - export from source. Source: https://www.tinkercad.com/things/3PX4gyZZgYu

About this model

Mini Tiny-Touch NMPG is a 免费 3D model in the 微缩模型 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型