简介
These cubes are perfect to check stringinging (and multiple check for other tests). There is a bottom layer connecting the cubes so you can mark and keep them. I normally check with new filaments by default: * slicing with 0.2mm, 2 perimeters, 1-3 bottom layers, no top layer and no infill. * choose a reasonable speed (50mm/s) (modify later by GCode M220 S ) * "normal" temperatures for bed and hot end (modify during print to check for influence of temp) * travel speed to 200mm/s * retraction 5mm, 60mm/s (550mm bowden to e3d) The boxes are 20mm, and distance 10, 20 and 40mm between each. After temperature sweet spot is found, one can play with travel speed and retraction.
About this model
Stringinging cubes test is a 免费 3D model in the 时尚与首饰 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
