简介
Llavero de Coca-Cola Este llavero representa el logotipo de Coca-Cola. Está hecho en Fusion 360 y tiene un agujero para la anilla en la parte superior. Dimensiones Alto: 25 mm Ancho: 50 mm Profundidad: 5 mm Instrucciones de impresión Se recomienda imprimir con una boquilla de 0,4 mm. La altura de la capa debe ser de 0,2 mm o menos. No se necesitan soportes. Instrucciones de montaje Una vez impresa la pieza, recorta el exceso de material. Inserta la anilla en el agujero. Información adicional Este modelo está disponible para descarga gratuita en Thingiverse. Coca-Cola keychain This keychain represents the Coca-Cola logo. It is made in Fusion 360 and has a hole for the ring at the top. Dimensions Height: 25 mm Width: 50 mm Depth: 5 mm Printing instructions A 0.4 mm nozzle is recommended. The layer height should be 0.2 mm or less. Supports are not required. Assembly instructions Once the part is printed, trim away any excess material. Insert the ring into the hole. Additional information This model is available for free download on Thingiverse.
About this model
Coca-Cola keychain is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
