Lars Ulribs

简介

Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform! Click here to join STLFLIX (https://www.stlflix.com/) Lars Ulribs This STL file is recommended for FDM Printers! 3D Printing Time: 2 Days 07 Hours and 55 Minutes Approximately Height: 26cm I don’t know about you, but for me, this guy looks a bit drummatic. Assembling Instructions: Take GEAR1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY. Fit GEAR3 onto GEAR2 and attach it on top of GEAR1 so that GEAR3 is facing downwards. From the outside, thread GEAR8 so that the pin goes through the holes of the aligned gears on the inside. Attach GEAR4 onto the pin of BODY. Attach GEAR5 onto the top of GEAR3, through the pin of GEAR8. Place GEAR6 on top of GEAR4. Fit CHESTPLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video. Put GEAR7 over CHESTPLATE, fitting it onto the first pin. Attach CHESTELIPSE so that the inner diameter touches GEAR7, as shown in the video. Fit CHESTELIPSESLIDER below CHESTELIPSE, in its designated space. Finish by attaching and gluing the remaining parts, following the assembly from the video. COPYRIGHT & SELLING RIGHTS This STL file is copyrighted by…