Mini Spray Booth Kit - Design Tech

简介

i designed the corners and channels for a mini spray booth as i required one for the models i have printed, i would recommend the following:Bed temp 70nozzle temp 210material PLAyou can print this at a 0.03 resolution or draft resolution for quicker print timethe wood i would recommend is 6mm MDF cut to the exact dimensions in the drawing file. (**NOTE** light sand the edges of the panels to allow a little easier fitting to channels and corners as it is a tight fit)the hole in the top is for a extractor fan standard diameter of 100mm.in total i spent the following£15.00 filament£12.00 MDF£23.90 Extractor Fan (you can use any you like but i got this one with LED light) https://www.amazon.co.uk/dp/B01MYT7041?psc=1&ref=ppx_yo2ov_dt_b_product_details£6.49 Flexible Ducthttps://www.amazon.co.uk/gp/product/B00OBFX534/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1£9,99 Wire with switch & Plughttps://www.amazon.co.uk/gp/product/B099ZRS7NL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1The turntable is a revolving turntable that works with a 3d printed bearing which both are in my collection if you need it.Thanks