Yihome camera support for Creality K1

简介

Having overheating in Creality's K1 camera (which I didn't know how and where), causes loss of connection. So. I got tired of Creality Support that keeps telling me it's a "firmware" problem when it's false. I designed this bracket for use with a Yihome camera that you can find on Amazon or Aliexpress. This camera is cheap. You just need to remove it from its original mount. You also need 1 M4x10 mm with washer and nut to attach the camera to the bracket and also 1 M2x20 mm with washer and nut (or 2x M2,5x 8 mm) to attach the bracket to the left side of the threaded rod as you see in the picture but, if you don't want to use the K1 camera junk, you can flip to the right side on the slicer (or the symmetrical one) and use the original K1 camera screw. The X-axis does not hit the camera, so see in the images it looks full color (and gray/white color at night) to be attentive while printing. You can also buy a Yihome camera that has AI inside and also microSD slot... so you can use those images to record timelapses. I don't know how to put this camera inside Klipper so... you wouldn't need a microSD. Ask someone else. I used this bracket to design the rest: https://www.thingiverse.com/thing:4960462/files CAUTION: Print it on PETG/ABS because it gets hot.