简介
A replacement sensor shield for when the factory one cracks or chips from being shot and lets too much light into the sensor area. This part can work even if the sensors on your board are damaged/broken (not too many, or reading will be spotty.) This part is designed for the MKI version of the AC6000BT and I do not have A MKII or MKIII version to test compatibility with. If you do test the fitment with a MKII or III please let me know what the result is. This replacement is one piece and should print vertically with supports, resolution is unimportant. Print pictured is out of Matterhackers PETG at .3mm Layer Height. Be sure your horizontal hole expansion is tuned in your slicer or the shield will not fit over the metal ring.
About this model
Acetech AC6000BT Sensor Shield is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
