简介
This is the wall/hallway light in the Millennium Falcon accurately recreated in 3D. Derived from the Coughtrie SW10 light. I have included the original version along with a base and diffuser where you can light it internally. Also included is the Disney's Smuggler's Run Ride version which is basically the same, except without 3 extra holes between the cut outs. The parts, especially the hub, is highly detailed and a large file. No facetting. You will need 3 small screws to put this together. If you intend to use the base, you can use reflective tape on the bottom and illuminate it with a regular LED light bulb. Print the diffuser with a translucent medium of your own choosing. This is designed to print with a minimum of support. Part 1 may require some internal support. The largest part, the base, is 236mm W x 250mm L.
About this model
Millennium Falcon Light is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
