简介
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{materialprinttemperaturelayer0} ; set extruder temp M140 S{materialbedtemperaturelayer0} ; set bed temp M190 S{materialbedtemperaturelayer0} ; wait for bed temp M109 S{materialprinttemperaturelayer0} ; wait for extruder temp G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops ;G29 ;auto level G0 X0 Y15 F9000 ; Go to front G0 Z0.15 ; Drop to bed G92 E0 ; zero the extruded length G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line G92 E0 ; zero the extruded length G1 E-1 F500 ; Retract a little G1 X80 F4000 ; Quickly wipe away from the filament line G1 Z0.3 ; Raise and begin printing. --------------------EndCode------------------------- M104 S0 ; turn off extruder M140 S0 ; turn off heatbed M107 ; turn off fan G91 ; relative positioning G1 Z25 ; raise head 25mm G90 ; back to absolute positioning G1 X0 Y220; home X axis and push Y forward M84 ; disable motors
About this model
Ortur Obsidian - GCODE is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
