Adjustable angle floor stand for speakers - Septor3D

简介

I designed this adjustable angle stands for my speakers.The dimensions of my speakers are: W180mm x D234mm x H341mm, but you can put any similar class speakers you want. If you print the Top C file, the angle ranges are: - 8°-13° with Top C ext.stl installed - 18°-23° without the Top C ext.stl installed If you print TopB.stl version along with the BackRocker.stl then angle depends on the adjusting screw and the position of the stand You can adjust the angle using the center screw Assembly Video: 3D printing settings Print with PLA or PETG -3 walls -15% gyroid infill -No supports Print files Bottom Pad.stl and Top Pad.stl x2 times in TPU Print Pin.stl x2 times The male/female parts are designed with a 0.2mm tolerance to fit quite snugly without the need of post processing to fit. But depends on your printer/settings/filament. If you find them to be loose, you can always put some drops of CA glue