简介
Designed for the Creality CR-10S, this should fit all standard Creality printers. Should! I've kept this as minimal as possible for light weight and for improved visibility of the printing part. Upgraded part cooling with a 4020 blower fan (https://www.banggood.com/DC-12v-4020-Brushless-Sleeve-Bearing-Turbo-Blower-Cooling-Fan-with-XH2_54-2P-Cable-p-1425580.html?cur_warehouse=CN&rmmds=search) instead of the little standard one. Also has room for an Aus3d IR probe (https://aus3d.com.au/ir-z-probe) which is my favourite levelling probe for glass beds (once you paint the bottom of the glass black!) (not sure how well it works when there's glue on the bed though) Prints without support, as long as it's lying on its back. Mine's PLA and I haven't had problems with it melting, but I always have the blower running. Mounts to the X sled with the standard bolts. Re-uses the hotted fan, or you can fit a thicker, quieter one. You'll need M3 screws to mount both the fan and the blower, and the length will depend on the fans you use.
About this model
Creality Blower Cooler is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
