简介
UPDATED Aug, 14 2013 These are my updated profiles for printing with the Replicator 2 using the latest release of ReplicatorG 40 (r16) and Sailfish. My guide to installing the Sailfish firmware on the Replicator 2/2X can be found here: thingiverse.com/thing:61022 (http://www.thingiverse.com/thing:61022) Improvements include: A 5D pre-prime sequence with slow wipe 100 micron profile with 200 micron first layer Improved dwindle setting to reduce stringing 340 micro zero fill profile for printing stretchlet bracelets Material profiles match - use PLA for PLA and ABS for ABS, the only difference is the packing density An improved zipper
About this model
ReplicatorG profiles for Sailfish is a 免费 3D model in the 动物与生物 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
