简介
The size tolerances are small, so for fine-tuning the parts, it will be useful to remove possible printing artifacts and work a little with a flat needle file in the grooves. It will be better to lightly lubricate the friction points with mineral oil or silicone grease (just do not overdo it, so that the grease does not get on the outside). Before assembling, rub the moving parts and check the tightness of the fit. To put the button in place, you need apply pressure from the back side with force on the ledge the spring. The size tolerances are small, so for fine-tuning the parts, it will be useful to remove possible printing artifacts and work a little with a flat file in the grooves. It will be better to lightly lubricate the friction points with mineral oil or silicone grease (just do not overdo it, so that the grease does not get on the outside). Before assembling, rub the moving parts and check the tightness of the fit. To put the button in place, you need to press the back side with force on the ledge on the spring.
About this model
Keychain Knife with a button is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
