Desk lamp

简介

Hello, I offer you my desk lamp: Lamp base width 15cm Height of the lamp unfolded to the bottom 52cm In the folder you will have the screws, wing nuts and washers. You will therefore have to print or buy: two 4x5mm screws one of 2.5x5mm for the lampshade three M5 washers (not required) three M5 wing nuts Then buy in addition a socket holder for the bulb with cable, plug and switch. I took the one where I had to cut the wire to pass it through the lamp and solder the switch closer to the lamp: https://www.amazon.fr/gp/product/B07GJNQFTV/ref=ppxyodtbasintitleo00_s01?ie=UTF8&psc=1 And of course a light bulb. I printed it the same color as the matte black PLA images from Dailyfil: https://www.filimprimante3d.fr/filament-pla-mat/2506-bobine-pla-noir-rendu-mat-175-mm-dailyfil-500g.html And the sticks with PLA Wood from Sunlu: https://www.amazon.fr/SUNLU-Wood-Filament-Dimensional-Filaments/dp/B01M1EATN5/ref=pdcp3282/262-2323381-8542001?encoding=UTF8&pdrdi=B01M1EATN5&pdrdr=418cd38f-65c4-4f94-84bf-a53061dc993b&pdrdw=P9Njx&pdrdwg=RvrnE&pfrdp=88d90214-9307-47b1-9c5f-3bc89ec73aea&pfrdr=PC5887MDZC27ZFT19KRZ&psc=1&refRID=PC5887MDZC27ZFT19KRZ I hope you like it! If you have any questions, don't hesitate!