Pi Zero + Zero4U CCTV case

Pi Zero + Zero4U CCTV case

免费 STL 收纳整理
  • 14 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

Low budget surveillance system For Raspberry Pi Zero 1.3 only. Printed in 0.1, ABS smoothed with acetone M2.5 screw's head must be mount side of the Pi Zero, and nuts side of the Zero4U. Soft used is motionEye (https://github.com/ccrisan/motioneye) with Raspbian Wheezy. Dimensions of the camera took from raspberrypi-spy (http://www.raspberrypi-spy.co.uk/2013/05/pi-camera-module-mechanical-dimensions/) Dimensions of the rpi took from raspiworld (http://www.raspiworld.com/images/other/drawings/Raspberry-Pi-Zero.pdf) I added ton of pictures including some macrographs, it need a bit of adjustments but looks already neat. I've choose to don't make a hole for the Mini USB-b of the Zero4U due to the flex cable who obstruate him. Hardware: Raspberry Pi Zero - Version 1.3 Pi NoIR Camera Board rev 2.1 8MP Raspberry Pi Zero camera adapter flex cable Zero4U: 4-Port USB Hub for Raspberry Pi Zero (V1.3 only) USB to Micro USB with ON/OFF Switch Charger Power Cable for Raspberry Pi Wifi dongle RT5370 up to 3 others usb camera with the rest of free USB.

About this model

Pi Zero + Zero4U CCTV case is a 免费 3D model in the 收纳整理 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型