简介
Bring Drill Man to life with this detailed 3D print. With his heavy armor and signature drills, this model captures his powerful, battle ready design while staying fun and easy to assemble. Perfect for display, this build is a must have for any Mega Man fan or collector. Dimensions: At 100% scale, Drill Man stands approximately 7.9 inches (200mm) and 6.5 inches (165 mm) wide. Scaling up should work fine, but scaling down may tighten tolerances and make assembly more difficult. Colors Used: Bambu Basic: Red, Gray, Dark Gray, Yellow, White, Cyan Bambu Silk+: Green, Silver Esun PLA+: Beige (Skin Tone) Assembly Tips: To help Drill Man stand level, it’s best to glue the legs and boots one at a time. Start by inserting both boots and knees into the legs without glue to test the fit. Remove one boot, then glue the red boot to the dark gray knee. Place it on a flat surface and let it dry to keep everything level. Next, glue the leg to that same dark gray knee and return it to the flat surface until fully set. Repeat the same process for the other boot. The notch cut out on the silver ring on his chest faces towards his head. The yellow charge blocks on the left and right hands have the top cut at a slant; this points up towards the drill. The part with the hole cut in the slant is for his left arm. Assembly Steps Build the legs and boots following the Assembly Tips above. Attach the yellow upper knee parts. Attach the yellow belly to the pants, then attach the chest to the yellow…
About this model
Drill Man (Mega Man) is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
