Choco Melt Easter Egg - brock lovell
- 20 次浏览
该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。
在 Creality Cloud 查看 ↗简介
Oops, looks like the chocolate’s melting! But don’t worry, it’s still delicious. ● This STL file is recommended for FDM Printers! ● 3D Printing Time Based on Ender 3: 01 Day, 01 Hours, 41 Minutes (will vary accord to you printer model) ● Approximate Measurements: 15 x 18 x 18 cm 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) ● Line Width/ Nozzle: 0.4 mm ● First Layer Line Width: 0.48 mm / 120% ● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) ● Recommended Initial Layer Height: 0.2 mm ● Recommended Layer Height: 0.2 mm ● Recommended Perimeters/ Walls: 3. ● Recommended Infill (%): 10% (Gyroid) ● Needs Support: No. ● Build Plate Adhesion: None
About this model
Choco Melt Easter Egg - brock lovell is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
