简介
I have a family member that LOVES Infernape. I created a clock using this face as a gift. The printing details including layer changes and filaments used is attached. To create the clock, I created this HueForge model, then got a few things from Michael's: - 10" wooden backer (3-pack) - Quartz clock drive - Larger hand set To assemble: 1. Glue the model to the 10" backer. Center it carefully because there will be a slight border around the face. 2. Measure the center carefully, and mark it. 3. Use a drill bit size appropriate to the clock mechanism. 4. Drill the center out from the front. Use slow speed so the plastic doesn't melt. 5. Mount the clock mechanism and if necessary, use the bigger clock hands. 6. Put in the battery, set the time, and enjoy! The 3mf has the filament changes at the appropriate layers. If the 3mf doesn't work, the STL is also available. The 3mf was designed for an Flsun T1 Pro, but should work with any other properly-sized printer.
About this model
Infernape Clock is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
