简介
The XL Bauble. Approx 10", 25cm if printed on the H2S. you can scale up or down. The top is threaded and prints separately, then just screws into place. Ive Printed in Ziro, green silk. I cannot stress enough, You must have good adhesion or use a brim. If using Silk, With All silks it's not suitable for supertack or similar cool plate. As silk is significantly weaker than normal PLA and break when removing. The inside does require supports but the supports created when using Tree auto are quite decorative and could be used as a decoration on their own. Ive set top z to 0.275 which has always worked well for me. otherwise its, 0.2 layer, infill is irrelevant as it just prints walls. so leave at 15%. Lastly as i know i will get asked, i will release a plain version soon. and Drop below any suggestions for alternate text. | Download free and paid 3D printable STL files
About this model
XL Bauble by ENIQUE3D is a 付费 3D model in the 其他 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
