简介
Original Idea by Tiktok creator: @chuuckaduuck This base print shows how water can be 'sealed' into an infill sponge, using surface tension and probably also wall effects (some shear resistance). By having a sealed cap when filling with water, and then removing it, you can generate enough of a pressure differential to cause water to drop out of the central location (not impacting the rest of the surrounding water, that is still 'stored'). With this print, you will need a 1/4" drill bit or slightly smaller, to punch a hole through. Otherwise, (the preferred method), is to use a slicer to modify the g-code, to remove top/bottom layers where required. An alterative method is to insert a print pause before the top layer closes, and then to drill a hole as mentioned in the bottom.
About this model
Infill Sponge 0 is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
