简介
$4 LIPO checker that can be used quickly to see all the cell voltages. (Supports 1-4S LIPOs, Li-ion or any similar batteries with 2.5V-30V cell voltage). Things you need: - 4 x Voltage displays (https://www.banggood.com/0_28-Inch-Two-wire-2_5-30V-Three-wire-0-100500V-Digital-Display-DC-Voltmeter-Adjustable-Voltage-Meter-p-1530256.html?p=P2081224690790201809&custlinkid=728841) - 1 x Balance wire (https://www.banggood.com/JSTXH-LiPo-Balance-Wire-10CM-2S-3S-4S-5S-6S-p-925209.html?p=P2081224690790201809&custlinkid=728842) Wiring: Balance Wire 1 (ground) to-> First voltage displays Ground Balance Wire 2 to-> First voltage display Plus Balance Wire 2 to-> Second voltage display Ground Balance Wire 3 to-> Second voltage display Plus Balance Wire 3 to-> Third voltage display Ground Balance Wire 4 to-> Third voltage display Plus Balance Wire 4 to-> Fourth voltage display Ground Balance Wire 5 to-> Fourth voltage display Plus Remember to use heat shrink to isolate your solderings! After soldering and testing that everything works, Adjust screws behind voltage displays until each display show correct cell voltage!
About this model
4$ LIPO checker (1-4S) is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
