简介
A light duty support to keep the chain & bar off the workbench. Will allow chain rotation. Body: Designed to be printed at 100% speed. Uses 5 x 50mm bolt & nut. GoPro handle will also work. Two 5mm nuts can be used to pull bolt into place by using a second nut on handle. See image. I added a piece of inner tube (or equal) to the side pad & rounded the bolt end. Body may be secured to a block of wood. Allowing bar support to twist may break it. Bolt Handle: Was designed to be printed with the following criteria. Larger base portion @100% speed with tapered part & small end @ 50% speed using 0.3mm layers. Pull bolt into handle with a over-sized nut & a 5mm nut. Different print speeds will result in slightly different internal diameters. Slower knob base print speed will make the hex hole larger, faster print speed on the tapered portion will make the hole smaller and deform the end. A timer will help with the speed issue. Outer Guide: May be used if chain sharpening. Clean holes with a 5mm drill bit after cooling if necessary. A little crazy glue will secure rubber pad. File guide handle: http://www.thingiverse.com/thing:1751993 Bar oil spout: http://www.thingiverse.com/thing:1764433
About this model
Chainsaw Bar Support is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
