简介
THE DRAGON IS BORN!!!...and it's time for a new SHAPE TO SHAKE!!! I create a new kit for the shape shaker with a "DRAGON shape"! The SHAPE SHAKER is a mechanical toy composed by several parts. All the pieces are printable with the only exception of a toothpick (length of 144[mm] - diameter 3[mm]) and they are mounted using only the hands and a screwdriver. The assembly is very simple. If you encounter some problems during the assembly, use sandpaper and/or a cutter to do a post production of the pieces. Glue is not necessary for the assembly. The housing is composed by: 1 BASE, 1 ROOF and 2 WALLS; all these 4 pieces are hooked with simple clips. The main part of the mechanism is the CRANKSHAFT that is manually actuated thanks to an HANDLE (composed by 3 parts). the DRAGON's parts (HEAD-BODY-TAIL) are coupled to the RODS with a slight interference. in particolar you have to insert the PIN first inside the last ROD and then inside the TAIL . The13 RODS are connected to the CRANKSHAFT from above through the ROOF The RODS are also constrained to a WOODEN SHAFT obtained from a toothpick (length of 144[mm] - diameter 3[mm]) inserted from the WALL_1 and closed by the SCREW. That's all folks! Shake your shape! Have a nice Print! Ocrobus 3D Maker
About this model
SHAPE SHAKER DRAGON is a 免费 3D model in the 动物与生物 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
