简介
Attachment for side of EPAX vent fan to connect 2" duct hose to remove fumes. Designed to use existing fan screw holes, but you will need to replace screws with some that are 3mm longer than the stock ones. Hose - https://www.amazon.com/gp/product/B00KQPCE8A/ref=ppxyodtbasintitleo00_s00?ie=UTF8&psc=1 Attachment allows for host to be plugged and unplugged from the unit for ease of service. Hose connected will be tight, but this is on purpose for a good seal. Use a piece of sand paper to lightly take it down and make it easier to go in and out.
About this model
EPAX X1 Vent Fan Attachment is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
