简介
Before printing of axis rotational things, there is a point in making a center of roation axis uniformly oriented. This test answers the question: which is center of rotation xy scale factor on 200 mm diameter. How to use: Print this test, measure x and y(place test xyz proper in your slicer, there is letter on the top and axis orientations), divide x\y, if = 1, it is ok. If not, for example x diameter=200.5 y diameter = 201, 200.5\201 = 0.9975, then set the scale value x scale=1,y scale =0.9975, or vise versa: y \ x, then set in your slicer x scale = 1.0024, y scale =1, depending on the closest value to 200 mm. Thank you for your attention!
About this model
Roundness test is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
