简介
These goggles have thermal vision but require some attention and skill to be assembled -at least 2 materials are needed for this print: an elastic one and a rigid one (petg/abs and tpu are recommended) -a separate battery (at least 2A 5V li-ion or nickel cadmium type), some cables, acetone based or vynil glue, hot glue, some 3x20/12 bolts and nuts, two thermal cameras with micro usb connector (or c type eventually) are necessary, a bucle or any sort of securing piece to fit your head with an elastic band or the band model provided among the other files -a couple of collimating lenses, something like the ones found on: https://www.amazon.it/ottico-collimatore-riflettore-staffa-20-100/dp/B08Q8JZ7RC/ref=sr127?_mkitIT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2NHM9FQX5PNR7&dib=eyJ2IjoiMSJ9.VcVm7A5Zxu2Xh7LX0Pj2HFlegbxgJLUoCLZJ-g0CehAh0Rpaycj6IIVswXUKSLrBY6OJpy6qsZ36UHG38hnbYD3p3ts6CjnCRPqhtrmplVcGSKsBKgDe-1UNhYQWpZfHRkoNyVPR09q0XPRxXvL9kycZVwjQbB8I1QkO5K0Em7koAVAcnbCOdxM2YCTcNrVBmSs4fvFqW0C2z3Eu0EsxcCYvA2uQlOn4od8AEpnSFBq9E8OTz5m3syXCyl8LsQ-SlIZTr-TVfgs-iDxfx8pimnfQKsmphQvQbwtixDOiw-S-knjJZq5b22vN5Qmg8T6mIWy5K1dplM2aw9QmV9txww7b6vXD5pt--4GGlio6xa8NqZHj8TovM2HoNTzhAGss0cQiUUT-KejFJA0BnxPQY3XxsId-VdWEbR-3SfLVOP9R6kjsfocxN3PiA-DI.RJn26fd7g26SgKBlGUa37ln8uCqUHk1mC1dPD7S90&dibtag=se&keywords=collimatore+lens&qid=1741103139&sprefix=collimator+lens%2Caps%2C99&sr=8-27 - -thermal camera link…
About this model
THERMAL VISOR Goggles is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
