Pet bottle cutter, adjustable heightby RCalin
- 28 次浏览
该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。
在 Creality Cloud 查看 ↗简介
Pet bottle cutterIt uses 3 m8 hex screws, 2 for the bearings, 1 for the guide(you need to cut it for the guide like in image, you can use angle grinder or a metal handsaw?, 4 m4 nuts and washers. one nut is used for the adjusting gear. Two 608zz bearings, you will need to sharpen them with an angle grinder.And 4 screws if needed to be attached to a table or something. the holes are for M4 screws.an m5 nut and a threaded m5 rod, which holds the bottle, this is not necessary if you hold the bottle by hand.printed in pla, 20-60% infill, 3 or more walls/top/bottom.
About this model
Pet bottle cutter, adjustable heightby RCalin is a 免费 3D model in the 动物与生物 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
