Smoke Case

Smoke Case

免费 STL 收纳整理
  • 23 次浏览

该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。

在 Creality Cloud 查看 ↗

简介

I designed this cigarette case to be a little thinner than the other one. It can be printed without a CFS, but it can be a little tricky. In order to print without the CFS you have to print the files separately, but make sure they are aligned in the same spot on the build plate, print the logo first, and then leave the logo on the build plate and print the case over top of it. The logo is only two layers thick when printed at .2 layer height and there should be no problem printing the case on top of it as long as the models are aligned properly.The case requires 2 magnets, 5x5x5 mm cubed, an elastic, some glue, and a piece of filament for the hinge.

About this model

Smoke Case is a 免费 3D model in the 收纳整理 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

相似模型