简介
This is a visor for the Saphe T traffic alarm.it is mounted using a ring magnet, that has a 12mm outer diameter, 8,5mm hole (1,75 wall) and 4mm thick.The magnet is installed during the print, the print will pause at a certain time, here you will have to place the magnet, and hit Resume print afterwards. (remember to place the magnet right side down)The one i used is bought in Bauhaus, and can be found HERE, another magnet with same measuements can also be used.The visor can be used with the original mounts that comes with the Saphe T,or you can print the Flexi Arm that the visor is designed to fit. (Click the image below to find the Flexi Arm)There are 5 plates, one for each overhang length (10, 15, 20, 25, 30 mm) - Print the one you prefer.
About this model
Saphe T Visor is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
