简介
UmbreonPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 94.4x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8e9089 PLA BambuLab Gray Transmission Distance: 2 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ff6a13 PLA Bambulab Orange Transmission Distance: 5.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #10 (0.88mm) swap to Gray At layer #16 (1.36mm) swap to Sunflower Yellow At layer #18 (1.52mm) swap to Orange At layer #20 (1.68mm) swap to Red At layer #21 (1.76mm) swap to Jade White for the rest.Boost MeBOOST!Boost
About this model
Umbreon - Hueforge is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
