简介
FIFA Fair Play TrophyDesigned with AIThe tip of the "upper" arm apparently can not be sliced (i guess it is because it's extremely thin)I recommend a minimum of 25 cm height but if you want it smaller you must use a 0.2-0.3mm nozzle.I highly recommend adaptive layer and adaptive infill. While the base can be made with a 0.3 layer height, the joint between the leg and the base must be max 0.2 with 100% infillTo use less filament, you can adapt the infill from the "upper belly" till the "shoulders" to 20-30% but ONLY on the main body. the leg and arms must be 100% due to very thin parts.
About this model
FIFA FairPlay Trophy is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
