简介
Do you recognize the problem with foldable chairs that are difficult to move? I came up with a solution for the foldable chairs from the Action store (Europe) in the form of a simple lock. With this lock the chair won't fold while you try to move it.It's best to use two of these locks for each chair. Each lock exists of two printable parts and a 4.5 x 50mm screw.Just remove the upper screw from the bracket and place the lock with a longer screw.The cylinder is printed separately so that the whole thing can turn more smoothly.Printing:3D Printer: Kossel XLSoftware: KISSlicer v1.6.2Material: PETG blackLayer thickness: 0,2 mmHead: 0,4mmExtrusion width: 0,35mmInfill: 50%Nozzle temp.: 230 degr. CelciusBed temp.: 80 degr. CelciusI used 3DLAC adhasive spray to prevent warping
About this model
Foldable chair locking system is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
