简介
A simple pocket comb that prints flat in one piece on any FDM printer. Fine teeth on one end, wider on the other for thicker tangles. The handle is a smooth ellipse — easy to grip, no sharp edges. 3D-printed pocket comb in brown PETG https://files.catbox.moe/f3d0u0.jpg 🎨 How to print Printed on a Bambu P2S in PETG without any supports. PLA also works. Lay the comb flat on the bed and go. 💡 PETG flexes a little and resists snapping a tooth better than PLA — a good pick for something that lives in a pocket. 🛠️ Print settings | Setting | Value | | --- | --- | | Printer | Bambu Lab P2S (any FDM) | | Material | PETG or PLA | | Layer height | 0.2 mm | | Walls | 3 | | Infill | 20 % | | Supports | none | | Orientation | flat on bed |
About this model
Pocket Comb (3D Printable) is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
