Square and Rectangular Base Set by Sira Haarstick

简介

All the Square and Rectangular Bases I could think off for wargames. The bases have a special triangle structure on the undersite to prevent/minize warping, thus they are valid for FDM and Resin printer. Square: 20mm, 25mm, 30mm, 40mm, 50mm - Slotta horizontal and diagonal: All Rectangle: 25x50mm, 30x60mm, 40x60mm, 50x75mm, 50x100mm, 60x100mm, 100x150mm - Twin slotta for: 25x50mm, 30x60mm, 40x60mm, 50x75mm All bases have a height of 5mm with a rim that is perpendicular to the surface.* This allows for an easy application of tape for resin pouring effects, and ample space for pinning. Even if your model needs to stand directly above the magnet, you still have 2.9mm of pin in the base.With or without slots for magnets, and instructions on how to add more slots in more sizes. By default the sizes are for 6x2mm and 10x2mm round magnets. One to four slots per base, depending on size.Slotta sizes are as follows: 25x2mm slots, for round, square, hexagonal, and octagonal bases. For the smallest base sizes, the slot is shorter. 40x2mm single and double slottas on oval and pill bases, only double slottas on rectangular bases.Very large bases have an extra split version for smaller resin printers. If a type of base is missing, let me know. With precise measurements of the base, if possible. *A flared rim offers no gameplay advantages. It is simply a result of optimizing the form for casting. As these bases are designed for 3d printing, where ease of mold release is not a consideration…