简介
Techno Raider Pauldrons blend industrial plating with sci-fi detail, ideal for raiders, androids, or wasteland soldiers. 📏 Measuring Instructions Default single pauldron size: 115 mm × 125 mm × 60 mm depth. Measure from the shoulder crest to upper arm midpoint to ensure proper coverage. Scale both sides equally to maintain consistent proportions. For figures or dioramas, scale down uniformly — all screw and panel details remain crisp. 🖨️ Printing Instructions Suitable for FDM and resin printers. Orientation: print flat on the inside surface for optimal strength. Supports: minimal, under outer vents and curve edges only. Layer height: 0.12–0.20 mm recommended. Infill: 20–25 % decorative, 35 %+ for wearable durability. Material: PLA+, PETG, or ABS for heavy-duty cosplay. 💡 Use a hairdryer or low heat gun to refine curvature to your shoulder after printing. 🎨 Finishing & Assembly Sand, prime, and apply a gunmetal or brushed steel base coat. Accentuate mechanical lines with black wash and silver dry-brush. For wearables: add EVA foam backing and secure via straps or snap mounts. For display: assemble with cyberpunk or wasteland props to complete the aesthetic. Finish with matte or semi-gloss clear coat for a durable metallic sheen. ⚙️ Model Type Recommendations Sci-fi or cyberpunk cosplay pauldrons Post-apocalyptic armor components Miniature or action figure accessories
About this model
Techno Raider Pauldrons is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
