Universal Bike Pump Mount by moXDesign

Universal Bike Pump Mount by moXDesign

免费 STL 数码配件
  • 13 次浏览

该模型托管于 MyMiniFactory。文件、图片及许可信息归原创作者所有。

在 MyMiniFactory 查看 ↗

简介

This pump holder should clamp to any bicycle so long as the frame cross section is circular. It should also hold any diameter pump. You will probably need two clamps to hold the pump securely. You will need:- M4x20mm bolts (2) M4x12mm bolts (1) M4 nuts (3) cable tidy straps (2) Fit the straps to the mount as shown in the images with the 12mm long bolt and a nut. Then attach to the bicycle with the 20mm long bolts and nuts. You may need to trim the straps to the correct length. | Download free and paid 3D printable STL files

About this model

Universal Bike Pump Mount by moXDesign is a 免费 3D model in the 数码配件 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

相似模型