Christmas Tree Display by ChibiBestiary
- 13 次浏览
该模型托管于 MyMiniFactory。文件、图片及许可信息归原创作者所有。
在 MyMiniFactory 查看 ↗简介
So I bounced around a lot on what to do for this one and decided on a little simplicity. The star prints separately to minimize waste due to that being the top of the tree. On the multicolor version I layer changed colors for the feeling of tinsel or garland. I accidentally miss set my AMS colors and ended up with a tricolor Christmas tree with white lines, but I don't hate it lol. Glue the star to the top so it doesn't move afterward. Print Settings: 2 parts No Supports needed I printed mine at .16 in height for a smoothness and Octagram spiral as the top layers for a neat look. 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Test printed successfully down to 50%, though could go further easily. | Download free and paid 3D printable STL files
About this model
Christmas Tree Display by ChibiBestiary is a 付费 3D model in the 其他 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
