简介
Physical Prints now from my website: https://rigboard.shop/ Spacer and Protector for the Asap Lock and similar devices. Designed and produced with heavy inspiration from Petzl's original design featured in their tech tips video. For use with a mobile fall arrestor between the pulley and device head when doing a drop loop haul or reeving system. Reduces the risk of rope failure in the critical zone. Separates the ASAP LOCK and the bottom pulley to prevent rubbing Increases the length of the rope between the two ASAP LOCKs (while protecting it): in the event of rope failure, this will leave enough rope to quickly tie a stopper knot below the ASAP LOCK, thus securing the rest of the maneuver. Petzl Article/Tech Tip Linked here: https://www.petzl.com/INT/en/Professional/Rescue--backing-up-a-drop-loop-haul-or-reeve-with-the-ASAP-LOCK?ActivityName=Rescue Use at your own risk. This is not PPE however can influence devices if not used correctly.
About this model
Petzl ASAP LOCK Protector/Spacer is a 免费 3D model in the 动物与生物 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
