Tpu stand for printer.

简介

Then it was time to print in TPU and noticed pretty quickly that the standard setup k1 max and k2 plus was not suitable when it came to feeding the filament into the printer. So I have now fixed a rig that holds the roll above the printer for smoother feeding. The kit fits rolls of plastic and paper ranging from 54,55,57,60 diameter. To make printing easier, I have built it so that it can be built together during assembly instead of difficult prints. Can be reinforced with glue if you want too but I myself did not need this. What is needed is an iron rod of 5mm and about 43cm long. 2 wheel bearings 19x10x5mm. Quick glue. The brackets fit nicely in both printers and sit firmly. K1 max and k2 plus 20 Files for varying sizes of the roll and hole kit. See pictures for orientation in slicer. 2 pieces need support (file no.1 and no.2) The rest can do without if laid as in the picture. Walls 4 for strength. Infill 10%. Support on two pieces. Please check out my other models.